The printer flies paper: what to do? Why does the printer are crushing paper when printing?

In this article, we will tell you what to do if the printer is wrinkling the paper, and for what reasons this happens.

Printers are good when they work, but when they do not do this, it can be extremely unpleasant.

Printers can work reliably for many years and thousands of seals, but they can also work incorrectly or not work at all. Excessive use of the printer can cause, for example, a trim of paper (and worse).

Elimination of problems when printing: the printer does not print

There are many options for why your printer does not print, so start with the basics, for example, check if there is an error or warning on the printer, make sure there is paper in the tray, check the presence of ink in the cartridge, and whether the USB cable is connected To the computer. If you have a wireless printer, then the problem is most likely at a wireless access point. Thus, you need to connect the printer via USB cable.

Sometimes the reason why the printer does not print is due to the fact that you have installed software that has "virtual" printer, and it set itself by default, so when you click "Print in Word", you actually save the file instead of sending the document for printing.

• To check, open the control panel in the menu "Start".

• Then go to the section "Devices and printers", click the right mouse buttonfor the desired printer and select it by default.

• Then make sure that in the program in which you print the documents, the desired printer is selected - you should see the option of choosing from the list, as in the image below.

Elimination of malfunctions when printing: Paper

Problems with the jacket of paper is satisfied, but still, you need to try to understand why this is happening, and not just pull out a crumpled piece of paper from a paper tray.

• First of all, you need to open a paper tray in order to continue to carry out further procedure.

• Thus, you need to remove the paper from the paper tray, open and spread all the shutters and look inside. You may need a flashlight to carefully consider the inside of the tray for the presence of garbage and possible obstacles.

• After that, you need to set the printer on a flat surface that would not have bumps.

Be careful! The old paper can absorb moisture, which makes it glue, and then it is stretched after two or more sheets at a time.

Why is paper stuck in a printer?

• Firstly,this can be the old paper that has passed the departure stage in adverse conditions. For example, it is impossible to use wet paper in any case, since it can disable the printer, as well as glue one paper in two, which will again affect its thickness and print.
• Secondly,this can be the other way around the paper that is initially supplied for other purposes. For example, paper, which is supplied for drawing, is by no means suitable for printing on a laser printer.
• Third,a situation is possible when the printing roller has ceased to function due to the fact that the printer has been standing for a long time without work.

Among other things, other individual problems are being considered by the printer "Eats" Paper, and gives it to be correctly printed.

Elimination of malfunctions when printing: Papa on the entrance

The problem is quite frequent and there is a place when using laser and jet printers.

Nevertheless, the solution to this problem is not difficult, and for this you need to adhere to our rules and instructions:

• First of all, you need to open a paper tray in order to continue to carry out further procedure.

• After that, you need to carry out the sheet calibration procedure by specially measured standards that are on both sides.

• Then, when you finish the calibration procedure, you will need to insert the tray into the printer, and try to print it again.

Elimination of problems when printing: Paparation at the output

The problem is quite frequent and there is a place when using laser and jet printers.

Nevertheless, the solution to this problem is not difficult, and for this you need to adhere to our rules and instructions:

• First of all, you need to open a paper tray in order to continue to carry out further procedure.

• After that, you need to carry out the sheet calibration procedure by specially measured standards that are on both sides.

• Then, when you finish the calibration procedure, you will need to insert the tray into the printer, and try to print any document.

• In the event that you received paper without any deformation, then this is undoubtedly good, and this only means that the problem was that the paper was not calibrated in the tray.
• If you received a paper, the photo of which you can see below, then this means a completely different problem. Such a problem is a malfunction of the cartridge roller and the input tray.

Well, today we figured out all the questions regarding problems in printing documents on your printer. Therefore, if this article helped you, then share it. If the methods did not help you, then be sure to write about her in the comments. We will help you anyway!

Video: Printer chews paper: What to do Epson L110 with SNPC