How to connect external columns to the TV, from a home theater? How to connect speakers to a smart TV?
Connect the speakers from the computer to the TV and enjoy good sound.
The standard speakers on TV equipment are usually “weak”, and there are few of them for a high-quality transmission of the sound signal from the video content.
- Manufacturers set cheap speakers so that the cost of TV equipment does not increase.
- There are enough of them to watch programs and films.
- But users sometimes want to enjoy the excellent sound of a new 3-D movie. What to do in this case? Connect additional autonomous speakers.
How to connect external columns to the TV, from a home theater?
Typically, the sound processor on TV equipment generates a signal well, it is precisely cheap built -in columns that spoil it. It is impractical to replace them with new ones, but you can connect speakers from a computer or home theater.
Important: an amplifier should be built into the speakers. This is the only way to achieve a signal improvement. Such speakers differ from ordinary ones in that they can be connected to the mains.
How to connect external columns to the TV, from a home theater? Instructions:
1. Reinforced speakers can be connected through a home theater or other equipment (music center).
2. To do this, connect the center to TV using wires called “bells” (model TRS-RCA or RCA-RCA).
3. Attach the corresponding wires to the connectors on both devices.
How to connect external speakers computer to the TV - each color to the connector of the same color
How to connect external speakers to the TV - colored connectors into which the same color of the plug is inserted
4. Good powerful speakers are also configured in an autonomous stereo system. If you have one at home, then you are lucky. A high -quality amplifier of this stereo system in the subwoofer, which lays out a sound signal according to the columns.
You can connect such a stereo system as well as a home theater. It is described above - each color of the plug is inserted into its color connector.
Thus, to enhance the sound, you will need a device with super -powerful columns and a special wire.
Important: try not to connect enhanced speakers to TV without an amplifier. From this microcircuit in TV can become unusable with a complete loss of sound in equipment.
Please note: all connectors have their own icon. The arrow that shows out, means that this connector is designed to exit. The arrow showing inside is for the input channel. Remember this.
How to connect speakers to a smart TV?
How to connect speakers to a smart TV?
Modern Smart TV, despite the use of new technologies in production, is not able to provide deep sound quality. Therefore, such a TV may also need to join additional speakers. How to connect speakers to a smart TV? Instructions:
1. The best sound will go if you connect the speakers using the optical entrance/output. If your TV receiver supports this format, then feel free to connect the Optical in and Optical Out connectors on your devices.
2. Connect the cord with an optical output to the entrance on the TV, which is indicated by Optical.
Connection of the speakers to a smart TV - optical input
Connecting the speakers to a smart TV using an optical cord
3. If your devices do not work using optical cables, then use the coaxial channel S/PDIF, Coaxial or RCA connector.
4. When connecting cables, guided by their shades: red, white and yellow. The wire of a certain color should be connected to the connector of the same color.
Connecting the speakers to a smart TV on a coaxial channel
Connection of the speakers to smart tv via coaxial channel
Many users of modern technology may have the problem of connecting bluetheus boots to the TV. Such wireless technology allows you to convey and receive sound at a great distance from the source. In this case, the sound quality falls, so it is better to use wired speakers or stereo systems.