How to make a cover for a smartphone with your own hands?
An article on how to make a smartphone cover with your own hands.
Navigation
In the age of high computer technology, manual labor is considered a valuable, exquisite craft. We suggest that you do this craft by offering a do -it -yourself crafts, in the form of a convenient, original case for your ultramodern smartphone.
The combination of the latest technology of the gadget and manual labor will give its creative zest, save your money.
Product manufacturing material
Production materials and improvised means are as follows:
- jeans -based fabric, soft leather, canvas, etc.
- lining fabric
- plastic
- tailor accessories: scissors, threads, needle
- little magnet. Used for a knife.
Metal plate
DIY smartphone covers
Production instructions
- release the shape of the smartphone on the fabric, applying it on the fabric
- mark the width and length of the product, adding 2 centimeters additionally
- cut the shape with scissors
- similar actions, perform with lining fabric
- fold both fabrics with a cut out of a smartphone to each other
- sew two fabrics, leaving a section on the side
- cut the rectangle of plastic, where the width is an inter -construction distance, and the length is 2 cm less than the main cut out product
- prepare a metal plate and magnet
- fasten the metal on plastic with a piece of fabric
- turn the stitched part on the front side,
- moving with an iron formed bag
- fold the plastic and lining together, making a cut in the lining for fasteners of the cloth. Prepared cut with your hands
- insert a plastic mold into a stitched bag
- take the screening of the lining section
- make a slot on the back of the case. To do this, cut through the sharp knife all three layers of the product
- pass the product with around the perimeter using a sewing machine
- attach the screening to the lining, noting where there should be a cut for him
- subture, left earlier, not a sewn piece
- fold the basis of the product in half, stitching both sides on the front side
Accessories for the manufacture of a case
Instructions for the manufacture of fasteners
- we prepare the main details, folding two rectangles of the main fabric (3 by 5 cm), one on the other
- satisfy the sides of the product, leaving one that should not be sewn
- by turning the product, iron it with an iron
- we put the magnet by fixing it at the end of the fastener, we make a transverse seam
- sew the fastener and knife
- we make external seams of figure shape on a sewing machine or hands
Smartphone fastener for magnet
You can show imagination, embroider a drawing in the form of a robot - an Android or the logo of the operator whose subscriber you are your life motto or name of a loved one. It is up to you! The main product, original and comfortable, is done.