How to make a smartphone stand on the table, in the car with your own hands?
An article about the manufacture of crafts of wood, paper, wires for a smartphone stand.
Navigation
Remember how nice it was to do in childhood, something with your own hands! Hear the praise of parents, feel your strength, ingenuity!
Crafts made of wood in childhood
What prevents us from now? Moreover, the home -made, a stand for a smartphone, has the following useful qualities:
- changing the height of the stand helps better transmit the phone signal, i.e. It works as an additional tower for an antenna phone device.
- aesthetic pleasure from the work performed.
Let's think together how to make a stand for a mobile phone with your own hands.
Wood stand
Materials for the product:
- board is packing or any strong board.
- glue for wood.
- threads, matches.
- material of dark color, wool, felt.
- metal carving knife.
- electrodegol in a set with drills.
- sandpaper.
- scurop 55 cm long.
Next, you can make a drawing according to dimensional parameters.
Slack stand
The following action is the manufacture "Backs" Cracks. The approximate thickness of the product is 5 mm.
IN "Back" We make holes using the drill to attach to the wall. The diameter of the holes is 3 mm and 6 mm, the holes are not through, it is needed to insert the screw hat. Do not forget to round the corners of the holes with sandpaper.
Holes for fastening
The next stage of crafts, manufacturing the legs of the stand. The parquet board is very good for this! The legs are made in the form of the letter d, in the amount of three pieces.
Manufacturing legs for a stand
In order for the stand to look aesthetically pleasing, the sharp corners of the structure should be slightly rounded with sandpaper. The back of the structure can also be polished.
The penultimate stage of the construction of a wooden stand, fixing all parts on the basis of the structure. It is appropriate to apply durable epoxy glue. Glue all the legs, in the middle and on the sides of the main part. Leave to dry.
The glued stand is dried
The final stage of the design is the lining of it with the material. First, sheat the “back”, then the legs. The product is ready.
Ready -made wooden stand for a smartphone
Paper stand
Did you play boat in childhood? Did you make hats from the newspaper? Imagine you will have to do just that to make a stall for a paper smartphone!
So, we start:
- prepare A4 paper.
- good mood.
- fold the sheet in half.
- make it "Boat."
- fasten the edges of the boat down.
- fold the edges in the triangle.
- expand the triangle in the form of a hat from sunlight.
- spread the resulting hat.
- the simplest stand for the smartphone is ready.
It is better to see once than read ten times!
Watch the video!
Video: Production of a Smartphone of Paper
Wire stand
What is required:
- one meter of wire.
- sleight of hand.
- we make a bend of wire, using nippers, as shown in the video.
- install a smartphone.
Video: Installation of a wire smartphone stand
We showed you how to make a smartphone for a smartphone from
different materials: wood, papers, wires.
Fantasize, you will succeed!