Why the iPone 4S is not included - Black Screen: Top 10 reasons. Why is iPhone 4S not turn on after upgrading, discharge, battery replacement?

In this article we will tell about 10 the reasons why it does not turn on or does not work iPhone 4S.

Apple has been developing high-tech and premium smartphones for more than 5 years, which are called iPhone. In the Internet networks there are a huge amount of rumors that Apple's mobile phones are exceptional in nature, compared with other brands and companies that are engaged in the production of mobile phones. But as it turned out, the smartphones from Apple also have no little so-called "Boychek", And this is despite the fact that for the price of this product will not give aide to anyone, but in quality is practically comparable to smartphones of the average price segment.

Therefore, many users often have different kinds of problems. For example, someone does not turn on the iPhone, either not charging, and someone complains about a flashing apple that shines each time your iPhone is turned on. Thus, many have questions, and how will it cope with it yourself? About this little further.

Top 10 problems with which the owners of the "Yarofones" may encounter

iPhone does not turn on, and only the black screen can be seen, how to be?

Quite a pretty problem for all Yablofon owners. At the same time, the problem shows only the black display screen, and that's all. The most frequent problem is that the smartphone is completely discharged, or IOS was a failure, and ultimately depended "Torsho."It also happens that the firmware fully flies on the iPhone. But what ways can you reanimate your iPhone, or at least try?

Methods and methods of solution in this situation

• If you used the iPhone in conditions below -15 and above +40, I'm not surprised if he once again won't work. After all, as you know, lithium-ion batteries are not maintained as high as possible as low as possible. At the same time, this problem is also on smartphones of other brands.
• If you are trying to turn on your smartphone, and at the same time it does not respond to press , then one of the problems is the full battery discharge. Thus, you need to put your iPhone for charging with a duration of at least 15 minutes. When the phone stood on charging for 10-40 minutes, you can try to turn it on if there is no hardware breakdown, it will turn on.
• Try using key combinations: "HOME"+" POWER ". Hold the above-mentioned key combinations for 25 seconds, or release them at the time of the iPhone turn on. If the apple caught fire, then undoubtedly release all the buttons, and wait for the full start of the iOS system.
• Try also the way to turn on the silent mode and shutdown it. It also helps if such a problem occurs.

The above-mentioned methods mainly help in solving this problem, but in other cases they are powerless. For example, if the components on your iPhone came into disrepair, or the water fell inside, and there are cases when the USB Cable for Charging was interrupted, that is, the wires appeared in some area.

I updated the IOS firmware version, now the iPhone does not work, how to be?

In the process of working with the iPhone smartphone, there is a similar problem, although all the actions were correct.

For instance, Apple, with the iOS 10 announcement, suspended the possibility of updating the firmware, as it was installed with malfunctions.

Methods and methods of solution in this situation

• First of all, you need to decide which version of iOS at the moment you can install, or what you can do the restoration. After all, as it is known, Apple does not prescribe the options to select the version of the IOS operating system.

• Determine which version of iOS you can go to, you can learn using this servicewhere you need to enter the iPhone model.
• Then you need to download a special official iTunes program, you can download it on official website. If you already have iTunes, then you need to just update. But if you do not know how to see the relevant version of the program, you need to click on the button "Reference",and then "Updates".

• Then you need to download the appropriate firmware version that you can still install on your iPhone. Loading firmware needs to be produced on official website.
• Now you need to connect the iPhone device with a PC, and this is done for the purpose of translation of the iPhone in emergency mode. This mode is activated using a key combination. "POWER" + "Home", with a delay of about 15 seconds. Then you need to release "POWER", but «Home »need to keep pressed for 15 seconds. The PC screen should get out the menu with a choice of action for the iPhone device.
• If your phone has already been determined in the iTunes program, now press the key. «Shift " on PC, and after keep the button "Restore" About 5-10 seconds. As a result, you will populate a window with a choice of a directory in which you want to indicate the location of the downloaded firmware.

• After that, you only have to confirm the recovery and transition to another version of iOS.

• Now that the IOS firmware recovery process will be completed, you will see that your iPhone started and earned again as before.

I forgot while putting an iPhone for charging, and now it does not turn on, how to be?

Very common and perhaps the most primitive problem, in which the owners of the iPhone are losing vigilance and come to the idea that their iPhone no longer works. But let's dispel this opinion and myth, and also give a couple of way to reanimation.

Methods and methods of solution in this situation

• As you know, lithium-ion batteries do not have the so-called "Memory effect", And consequently, after the battery on your iPhone was completely discharged, then it must be charged for 48 hours.
• Try to put the iPhone for charging for 15 minutes if nothing appears, it means that the battery charge is at zero. In this case, you need to put the iPhone for two-three days.

In the repair service on my iPhone replaced the battery, but it still does not turn on, what to do?

So, let's see what actions need to be done with such a problem.

Methods and methods of solution in this situation

• If you have already replaced the old battery on your iPhone, and at the same time it still does not charge, then the solution of this problem is the complete change of the charger. After all, very often there are cases when the charging unit is simply burning from the voltage drop, so you can face with it.

• If you went to the service to replace the battery on the iPhone, and at the same time it does not turn on, then this can only mean that the new battery is completely on the outcome, that is, discharged. Thus, the iPhone needs to be charged for one to two days.

Including iPhone, I watch a flashing apple, and nothing else

It happens when the apple is burning or flashes, but at the same time the iPhone does not start further.

Methods and methods of solution in this situation

• You need to run iTunes on a PC, and after insert the USB connector into the computer, that is, the cable itself, which you charge the iPhone.
• After that you need to completely turn off your iPhone, and at the same time hold the keyboard key «Home » + "Power".
• Then you need to hold the key «Home », And after connecting the phone from the PC.
• Button «Home » It is important to hold until the iCon and iTunes program appears on the display.

• Now the PC screen will jump out a notification that your device has passed into emergency mode.

• Then you can click on the button "Restore». After that, you need to wait a few minutes while your iPhone will restore until the previous factory settings. When the recovery process is over, the iPhone will automatically start, but already in working condition.

iPhone shows an apple at startup, and it flashes

In this case, there are several other actions to resuscate your iPhone.

Methods and methods of solution in this situation

• If the apple is on your iPhone constantly flashes, then you need to press two keys «Home » + "Power", and hold them about 15 seconds.

• If these actions have not led to a successful launch of your iPhone, then it means you need to make a flashing device.

What if the iPhone turns on and immediately turns off?

It happens and a similar situation when the phone seems to be turned on and is about to start, but immediately turning off immediately. In this case, other actions for resuscitation are considered.

Methods and methods of solution in this situation

• If your iPhone turns on and turns off in the moments when you install it for charging, it may only testify that the charging adapter is too weak. Thus, your iPhone does not receive a sufficient current at which it will be stably charged. Therefore, you need to buy a new and more powerful adapter charging for the iPhone, and in no case do not save on it.
• If in Winter Street, and you are in the conditions below -15, then do not doubt that the iPhone will be periodically turned on and off, by itself it should be. Apple has provided rigid temperature limitations in which the iPhone will not work stably. Normal conditions for iPhone work is not lower than -15 above +45.

What if the iPhone does not turn on and is not charging?

The problem is also fairly common due to its specificity. But what to do in this case, and how to solve this problem?

Methods and methods of solution in this situation

• If your iPhone does not want to be included, neither charge, it can only testify that the battery has completely sat on it, and it must be carefully reanimized.
• Consider that lithium-ion batteries do not have the so-called "Memory effect", And consequently, after the battery on your iPhone was completely discharged, then it must be charged for 48 hours.
• Try to put the iPhone for charging for 15 minutes if nothing appears, it means that the battery charge is at zero. In this case, you need to put the iPhone for two-three days.

What if the iPhone stopped turning on?

The most common and more global problem, which in turn covers all the above problems. But how to decide to decide what to do to turn on and worked?

Methods and methods of solution in this situation

• If you used the iPhone in conditions below -15 and above +40, then do not be surprised if it is once again not turned on and operating. But do not worry it temporarily, and to solve this problem, you just need to warm the smartphone in your hands.
• If your iPhone does not want to turn on when you click the button "POWER"One of the problems is the complete discharge of the battery. Thus, you need to put your iPhone for charging with a duration of at least 15 minutes.
• If you by chance dropped your smartphone in snow or water, then he can also give malfunctions. Thus, in the end, his work will cease.
• If your workplace is located in specially raw rooms, then you should not be surprised that on some day the iPhone just stops turning on. After all, moisture for electronics - enemy №1, which can forever withdraw the technique.

In any case, if you have such a problem, and your iPhone simply does not want to run, then you need to contact the repair service. Of course it will cost you in a good amount, but still it is better than buying the same new iPhone 4S.

Well, on this we will probably finish our article.

Video: iPhone does not turn on. Solution to the problem