How to strengthen the Yota modem signal? How to strengthen the 4G signal Yota modem with your own hands?
Many Internet users of Yota are interested in gaining a signal. We will tell how to make the signal amplifier do it yourself.
Navigation
If you are interested in the question of how to make the Yota signal intensified yourself, then you came to the address. Today, wireless technology is still not perfect enough to provide access to the Internet at high speed and a good signal. Therefore, people often think about buying a device for improving the quality of the connection.
But, skillful people have already invented methods that allow you to not spend a lot of money.
A homemade Yota Amplifier can be collected from the simplest materials. So, you will save several thousand rubles.
Slow Internet can be in any place, even where you are waiting for this. Improved technologies lead to the fact that the problem is manifested even in large cities. It is solved due to the antenna and the signal amplifier.
How to assemble the signal amplifier yourself?
If you want to make an amplifier yourself, first find the necessary materials. We will consider the most popular types of homemade antennas that enhance the signal:
- Bay
- Pseudosatellite
- Omnidirectional
How to make a cans amplifier?
Canine amplifier for modem Yota
You will need:
- The basis of such a design is a simple tune bank. Often used containers from under fruits or paint
- Copper wire 2mm thick
- A pair of screws
- N-nest
It is worth saying that after the preparation of all materials, you need to make some calculations.
- First of all, clean the jar from the mud. It should be a diameter of at least 7.5 mm and no more than 10 cm, and in height - at least 13.5 cm. The top of the banks do not need to cut, because it will be needed for you
- Cut the piece of wire with a length of 3.1 cm
- Sleep it to the central contacts of the N-nest. Wire must be smooth
- Now make a hole in the bank and attach a socket with a wire with a wire, as it will work as a wield conductor
- So that external factors do not affect wire, cover it with a plastic cap, which can carry out waves
You will take no more than two hours for the entire operation.
Pseudostellite amplifier
Pseudostellite amplifier for Yota
Pseudostellite is mainly applied in private houses. It's just do it yourself. You will need:
- Colander, saucepan, bowl or any such stainless steel
- A piece of cardboard with a sticked foil
- Metal grille, umbrella and so on
- USB extension length five meters
- Two screws
The design is going like this:
- Drill two holes in a saucepan or other selected material
- Place the cardboard with foil, and fasten the USB cord in the center of the product
- Secure the antenna in the right place
Omnidirectional antenna
Omnidirectional antenna for Yota
This design is great for urban apartments, from here and cheapness. But for its assembly, some knowledge is needed, without which nothing will happen. The desired details include:
- Cable with BNC 50 Ohm connector
- Soldering iron
- Gun with hot glue
- Knife
- Rule
- Awl
To create an amplifier:
- Torn cable for 4 cm
- Run him and divide the screen to 4 equal parts
- Unscrew 4 shields of the screen and bend them at an angle of 45 degrees
- At the base, fasten the bundles with glue so that they are fixed inside the design
- Cable with bare wires shorten up to three centimeters
- The same length should be done and taps
All assembly takes about half an hour.
How to connect the design?
Amplifiers to collect is not at all difficult, but when they are connected and configured, difficulties begin. The main thing is that the station station is directed correctly. The Yota amplifier will be well done only with a good signal level.
You can spend several hours on it, but you will get the fastest Internet.